Gutter Cleaning
Clear blocked gutters and downpipes before the wet season so storm rain drains away from your Townsville home. Call Townsville Roof Cleaning Pros today!
Learn More →
Soft-wash and low-pressure cleaning that lifts mould, lichen and grime from concrete and terracotta tile roofs across Townsville. Call Townsville Roof Cleaning Pros today!
Request a Free Quote
Tile roof cleaning in Townsville is mostly about one problem: those dark streaks running down the tiles. On concrete and terracotta roofs they usually come from algae that thrives in our wet season humidity. Moss and grey-green lichen take hold on the shaded side of the roof and along the ridge capping. We use a soft wash approach. That means a low-pressure rinse and a biocide treatment that kills the growth at the root, rather than a high-pressure blast that can strip coatings and crack tiles.
Townsville roofs work hard. Long, humid wet seasons give algae plenty of time to spread. Monsoon downpours wash organic matter into the valleys. Homes near the coast also pick up a film of salt and grime from the sea breeze. Concrete tiles are porous, so once the surface coating wears thin they hold moisture and stain faster. Older terracotta roofs often have tired pointing along the ridges. We keep the pressure low around those areas and let you know if we spot cracked tiles or perished bedding while we're up there.
A typical job looks like this. A lowset brick home with concrete tiles, dark streaks on the south-facing side, and gutters full of leaf litter and grit washed off the roof. We clean the tiles, then clear the debris that comes off so it doesn't sit in your gutters and block downpipes before the next storm. Many customers book gutter cleaning on the same visit for that reason. If you have panels on the roof, our solar panel cleaning service can be done at the same time, so we only need to set up access once.
From inspection to final rinse, here's what happens on your roof
We check the tile type, the condition of the ridge capping and pointing, and where the worst growth sits. Before any chemical goes on, we cover or pre-wet garden beds and move outdoor furniture. Any cracked or loose tiles get noted so you know about them before we start.
We brush off leaves, twigs and thick moss clumps by hand. Clearing this first lets the treatment reach the tile surface. It also stops matted debris from washing straight into your valleys and gutters.
We apply a biocide solution at low pressure across the tiles, working from the ridge down. It soaks into the algae, moss and lichen and kills them at the root. Dwell time depends on how heavy the growth is, and we keep an eye on the surface the whole time so the solution doesn't dry out in the sun.
We rinse the tiles with gentle water flow to lift the dead growth and grime. Then we clear the gutters and flush the downpipes so the runoff and debris don't stay on your roof line. Last, we walk the site and hose down paths and windows.
Practical results that matter through every wet season
Algae, moss and lichen hold moisture against the tile surface. Over time that wears down coatings on concrete tiles and loosens pointing along the ridges. Removing the growth helps protect the tiles from that ongoing damage through each wet season.
Black streaks make even a well-kept home look tired from the street. Once they're gone, the original tile colour shows through again. This matters if you're selling, leasing or tidying up a rental between tenants.
Moss and grit that wash off a dirty roof end up in your gutters and downpipes. When a monsoon storm hits, blocked gutters overflow into eaves and walls. A clean roof and clear gutters give heavy rain a proper path off your home.
Wet season humidity, monsoon rain and coastal salt all leave their mark on concrete and terracotta. We adjust our treatment and rinse to suit the growth we find on your roof. Shaded sides, valleys and coastal grime each need a different approach.
We don't blast tiles clean. Our soft wash approach keeps pressure low around ridge capping, pointing and older terracotta. That cuts the risk of cracked tiles and leaks later on.
Debris from a roof clean ends up in your gutters, and solar panels sit right on the tiles. We can clean all three on the same visit. You deal with one crew and one setup.
While we're on the roof, we look for cracked tiles, slipped tiles and perished pointing. If we find any, we'll tell you plainly and show you where. That way you can sort it out before the next storm finds it.
Common questions answered
Not with the method we use. High-pressure blasting can strip the surface of concrete tiles, crack brittle terracotta and wash out ridge pointing. We use a low-pressure soft wash with a biocide treatment, so the solution does most of the work, not the water pressure.
In most cases it's algae that feeds on the minerals in roof tiles and spreads in humid conditions. Townsville's wet season gives it ideal growing weather, and it usually shows up first on the shaded side of the roof. It isn't just dirt, so rinsing it alone won't stop it coming back.
It depends on shade, nearby trees, how close you are to the coast and the condition of your tiles. A roof under overhanging trees will grow back faster than an open, sunny one. We'll look at your roof and give you an honest view on when it's likely to need another clean.
The main factors are roof size, pitch, height, how many storeys, and how heavy the growth is. Access matters too, such as steep sections, tight side passages or panels on the roof. Request a quote and we'll price it for your specific roof.
Cleaning before the wet season means your gutters and downpipes are clear when the heavy rain arrives. It also removes growth before the humidity helps it spread further. That said, we can clean a tile roof whenever the weather is safe to work on it.
We provide Tile Roof Cleaning throughout Townsville, QLD and surrounding suburbs.
Don't see your area? Contact us to check if we service your location!
View All Areas